CT West Inc.


ITS Express Interconnect 1000

Interconnect 1000 delivers an unmatched combination of robust performance and affordability in the crowded wireless technology space.

The Interconnect 1000 Series wireless Bridge/Access Point, based on IEEE 802.11 band IEEE 802.11g Technology, delivers bridging and access point features enabling cost effective access Ethernet-Bridging and access to traffic cabinets within a five mile span. Up to 18 Miles Point to Point to Point with proper elevation and antenna. Maximized for Video multi cast networks. Vlans are trunked for pass thru without stripping out tags. Optimized for Traffic cabinet application, as well as point to point bridging. Bridging and ap access can be simultaneous, if desired. IP68 approved housing is fit for ruggedized outdoor environments.

In addition, supports IEEE 802.1x-compliant and RADIUS (Remote Authentication Dial-In User Services), the most up-to-date wireless security solution for applications in outdoor public places. Also, the cabinet interconnect 1000 provides standard WDS (Wireless Distribution System) bridge functionality joining LAN segments that may be geographically separated (e.g. cabinet to cabinet connections or cabinet to tower connections ) Up to 6 WDS bridge links work in Bridge/AP mode allowing simultaneous bridging and AP access, or straight point to point bridging, thus enabling LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve. The Antenna Alignment Utility provides the at-a-glance way to easily assist the antenna deployment through the friendly Windows-based user interface.
Download Datasheet (PDF)
ITS-8040

The most advanced ITS Industrial 8-port Gigabit Managed Ethernet Switch on the market featuring 4x10/100/1000T and 4x Gigabit Combo port designed for the most demanding IP Video Network.
Download Datasheet (PDF)
8 port 10/100/1000TX copper ports
Optical monitoring = instant status of voltage
Layer 2+ managed hardened IGMP video switch
4 10/100/1000 dual speed hybrid fiber SFP combo ports
Fast recovery time < 20ms over 250 units of connections
Designed for heavy multi-cast high heat traffic demands
Back plane (switching fabric) 18 GBPS, 8K MAC address
Multiple configurations: web browser, CLI, telnet
Event notification: syslog, email, SNMP & relay output
Full layer 2+ management, 802.1x authentication
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
Supports IGMP query & snooping version 1, 2 & 3
Dual redundant PS guarantees non-stop operation


ITS-8012

Industrial 12-port Gigabit Managed Ethernet Switch with 4x10/100/1000T and 8x Gigabit Combo port designed forthe most versital hardened ITS Video Environments
4 port 10/100/1000TX copper ports
Optical monitoring = instant status of voltage
Layer 2+ managed hardened IGMP video switch
8 10/100/1000 dual speed hybrid fiber SFP combo ports
Fast recovery time < 15ms over 250 units of connections
Designed for heavy multi-cast high heat traffic demands
Back plane (switching fabric) 24 GBPS, 8K MAC address
Multiple configurations: web browser, CLI, telnet
Event notification: syslog, email, SNMP & relay output
Full layer 2+ management, 802.1x authentication
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
Supports IGMP query & snooping version 1, 2 & 3
Dual redundant PS guarantees non-stop operation
Download Datasheet (PDF)


SFP Transceiver

The SFP transceiver is high performance, cost effective module supporting dual data-rate of1.25Gbps/1.0625 Gbps and from 10km to 120km transmission distance with SMF.

The ITS Express SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 120km transmission distance with SMF. The transceiverconsists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver. The standard serial ID information compatible with SFP MSA describes the transceiverís capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. The SFP transceivers are compatible with RoHS.
1310nm FP laser and PIN photo
Operating temperature -20 to +100C
10K-20K-40K-60K-80LK-120K transmission with SMF
Dual data-rate of 1.25Gbps/1.0625Gbps operation
Available with optical monitoring (-om series)
Standard serial ID compatable with SFP MSA
SFP MSA package with duplex LC connector
Spring-latch for high density applications
Avery low EMI and excellent ESD protection
+3.3V single power supply
Available in both single mode and multi-mode versions
Download Datasheet (PDF)
ITS-8020+

Advanced cost effective ITS Hardened Layer 2 Industrial 10-port Managed Ethernet switch designed for harsh Multi-Cast environments. Versatile & affordable hardened Layer 2 switch that exceeds the competition class specfifction with rich features such IGMP V1,V2, V3 and real time critical monitoring.

Optical Monitoring With Mapping Capabilities
Layer 2+ Managed Hardened IGMP Video Switch
Email notifications for Fiber Outages, Port down, ETC.
Multiple Configurations: Web Browser, Telnet, and CLI
7 Port 10/100 TX Copper Ports with 7.4 GBPS Back-Plane
Event Notification: Email SMTP, Syslog, SNMP & Relay Output
Fast ITS Ring Recovery Time 10ms over 250 units of connections
Easy to Configure, Web Interface designed by ITS users
Designed For Heavy Multi-Cast in Harsh environments
Full layer 2+ management, 802.1x authentication
Mode Fiber and BX Single Strand Fiber too!
Supports IGMP query & snooping version 1, 2 & 3
S-Flow network monitoring technology
Download Datasheet (PDF)


ITS-8024

Advanced cost effective ITS Hardened Layer two 24-port Managed Ethernet switch designed for harsh Multi-Cast environments. Versatile & affordable hardened Layer 2 switch that exceeds the competition class specfifction with rich features such IGMP V1,V2, V3 and real time critical monitoring.

4 port 10/100/1000TX copper ports
Optical monitoring = instant status of voltage
Layer 2+ managed hardened IGMP video switch
8x 100/1000 SFP Ports Plus 16x Combo 100/1000 SFP/1000TX RJ45ís
8x 100 or 1000 Dual Speed Hybrid Fiber SFP Combo Ports
Designed for heavy multi-cast high heat traffic demands
56 GBPS Backplane
Multiple configurations: web browser, CLI, telnet
Event notification: syslog, email, SNMP & relay output
Full layer 2+ management, 802.1x authentication
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
Supports IGMP query & snooping version 1, 2 & 3
Dual redundant PS guarantees non-stop operation
Download Datasheet (PDF)
CT West Inc., 43391 Business Park Dr., Ste C-8, Temecula, CA 92590  Phone: (951) 691-1385 Fax: (951) 308-4541 - ©2011 CT West Inc.-All Rigths Reserved